Adtemp™ 429 Non-Contact Thermometer

The ADC Adtemp™ 429 Non-Contact Thermometer uses advanced infrared technology to provide fast, accurate, and hygienic temperature measurement without touching the patient's skin. It measures forehead temperature in approximately one second from a recommended distance of 4–6 cm while helping minimize the risk of cross-contamination. The thermometer also measures object and surface temperatures and features a large backlit LCD display, Measurement Feedback System for proper measuring distance, 30-reading memory, Night Mode (mute), audible measurement confirmation, automatic power-off, ergonomic handheld design, and selectable °C/°F display.

• Non-contact infrared temperature measurement.
• Measures forehead temperature in approximately 1 second.
• Human and Object measurement modes.
• Measurement Feedback System for proper measuring distance.
• Recommended measuring distance: 4–6 cm (1.5–2.5 in)
• Large backlit LCD display
• Stores up to 30 readings
• Night Mode (mute)
• Audible measurement confirmation
• Selectable °C / °F
• Automatic power-off after approximately 30 seconds.
• Powered by 2 × AAA batteries (included).
• Approximately 2,000 measurements per battery set.
• Compact ergonomic design.
• Human Mode measurement range: 10°C–50°C (50°F–122°F).
• Human Mode accuracy: ±0.3°C (±0.5°F) within the specified accuracy range..
• Object Mode measurement range: 0°C–100°C (32°F–212°F).
• Dimensions: 129.9 × 52.4 × 44.5 mm
• Weight: Approximately 87 g
• Operating temperature: 16°C–35°C
• Storage temperature: -25°C to 55°C
• No probe covers required.
• Latex-Free.
• Phthalate-Free.

• Designed for non-contact measurement of human forehead temperature and object surface temperature in hospitals, clinics, healthcare facilities, screening stations, and home care.

1.Power On

• Press the Measure button. The thermometer performs a self-check and is ready for use.

2.Select Measurement Mode

Press the Human/Object button to choose:

• Body Mode for forehead temperature.
• Object Mode for surface temperature.

3.Position the Thermometer

• Hold the thermometer 4–6 cm (1.5–2.5 in) from the center of the forehead.

4.Take a Measurement

• Press the Measure button and keep the thermometer steady.
• When the measurement is complete (approximately 1 second), the temperature will appear on the display with an audible beep (unless Night Mode is enabled).

5.View Memory

• Press the Memory button to review the last 30 stored readings.

6.Automatic Power-Off

• The thermometer automatically turns off after approximately 30 seconds of inactivity.

7.Battery Replacement

• Replace the 2 AAA batteries when the low battery indicator appears.

• 1 × ADC Adtemp™ 429 Non-Contact Thermometer
• 2 × AAA Batteries
• 1 × Screwdriver
• 1 × User Manual
• 1 × Certification

• Use only at the recommended distance of 4–6 cm.
• Keep the infrared sensor clean.
• Do not expose the sensor to direct sunlight.
• Do not immerse the thermometer in water.
• Allow the thermometer to reach room temperature before use after moving between environments.
• Use only AAA batteries.

• Store in a clean, dry place.
• Storage temperature: -25°C to 55°C.
• Keep away from direct sunlight, excessive heat, and moisture.
• Remove the batteries if the thermometer will not be used for an extended period. 

• Meets ASTM E1965-98 standards for accuracy.
• CE Marked.